Modern elevator systems often require not only control and power transmission but also video surveillance, intercom, or TV signal distribution. The H05V3V3H6-F + TV HF 75 Elevator CCTV Cable is a hybrid solution that combines flexible flat elevator traveling cable with a built-in coaxial line.
If you are specifying, installing, or maintaining lift systems with camera or multimedia needs, this guide explains everything you need to know about this specialized cable.
What Is H05V3V3H6-F + TV HF 75 Elevator Cable CCTV?
The H05V3V3H6-F + TV HF 75 Elevator Coaxial Cable is a traveling cable that integrates:
H05V3V3H6-F – A flexible flat PVC cable for control and low-voltage power circuits
TV HF 75 – A 75 Ω coaxial cable designed for high-frequency video or audio signals
This combination allows a single flat cable to carry both lift control signals and video feeds (e.g., from an elevator car camera or multimedia screen).
Key features:
Flat, flexible design for constant bending
75 Ω impedance coaxial core – ideal for CCTV and TV signals
PVC insulation and sheath – durable and flame-retardant
Compliant with harmonized European standards
Why a Hybrid Coaxial + Control Cable?
Running separate cables for control and video increases installation time, weight, and the risk of tangling. The Elevator Traveling Cable CCTV solves these problems:
| Advantage | Explanation |
|---|---|
| Space saving | One flat cable replaces two round cables |
| Simpler installation | Single hanger system, one pull through shaft |
| Better signal integrity | Coaxial core is shielded against interference from power cores |
| Reduced wear | Flat profile bends uniformly without twisting |
This makes it ideal for elevators with onboard cameras, digital signage, or emergency video intercoms.
Technical Specifications (Quick Reference)
| Parameter | Value |
|---|---|
| Cable type | H05V3V3H6-F + TV HF 75 |
| Voltage rating | 300/500 V (control cores) |
| Coaxial impedance | 75 Ω |
| Coaxial core | Bare copper or copper-clad steel (check datasheet) |
| Shielding | Yes (typically braid + foil) |
| Flexibility class | Very high (suitable for travelling applications) |
| Temperature range | -15°C to +70°C (dynamic) |
| Sheath material | PVC |
| Flame retardant | Yes (EN 60332-1-2) |
⚠️ Exact core count and coaxial specifications may vary by manufacturer. Always verify with your supplier.
Applications in Elevator Systems
The H05V3V3H6-F + TV HF 75 elevator coaxial cable is designed for:
CCTV cameras inside elevator cars – Real-time video transmission to security room
Emergency intercom systems – Audio and video communication
Multimedia displays – Streaming content or floor information
Remote monitoring – Maintenance teams viewing car status remotely
It is especially useful for commercial buildings, hospitals, hotels, and high-rise residences where passenger safety and security are priorities.
Installation Tips for Long Cable Life
To ensure optimal performance of your H05V3V3H6-F + TV HF 75 elevator cable, follow these best practices:
Use flat cable hangers – Standard flat elevator cable hangers (max width ~98 mm) work well.
Avoid tight bends – Minimum bending radius should be at least 6× cable thickness.
Separate from high-power lines – Although shielded, keep distance from very high voltage cables if possible.
Terminate coaxial ends properly – Use BNC or RCA connectors rated for 75 Ω to avoid signal loss.
Secure both ends – One fixing on the car side, one on the shaft side.
Final Verdict
The H05V3V3H6-F + TV HF 75 Elevator Cable is a smart, future-ready solution for modern lifts that require both control and video transmission. Its flat, flexible design simplifies installation while maintaining excellent signal quality.
When selecting a travelling cable for a camera-equipped elevator, always choose a hybrid cable like this one to reduce complexity and improve long-term reliability.